Model 
 Features YG100-1H-DM 
 Rated output voltage DC12V 
 Output interface connection port 9500 marked the location seven OUTPUT: DC +; GND 
 Output voltage range setting error: ± 2%; adjustable range: ± 10% 
 Rated output current range of 0 ~ 8.3A current use 
 Output voltage ripple Vnor <120mV; Vp-p100Hz <120mV; Vp-pmax <120mV 
 Li; Lo regulation Line: ± 0.5%; Load: ± 0.5% 
 Comprehensive regulation accuracy ± 1% 
 Rated output power 100W 
 Rated efficiency ≈ 80% (output power rating) 
 Rated input voltage Rated voltage: AC 187-262, operating voltage: DC176V ~ 280V. Interface Location: Seven 9500 wiring port labeled INPUT: AC-L, AC-N 
 Rated input current Rated current: AC 200mA (AC220V), the current range of AC 170mA ~ 550mA 
 AC input frequency Vnor <1% Uin; Vp-p100Hz <5% Uin; Vp-pmax <10% Uin 
 Instantaneous power input surge current work on the impact of power supply current: cold start max 20A/10mS boot 
 Range of input over-voltage input allows AC 0 ~ 280V; over-voltage protection point AC300V ± 10V, power supply into an irreversible shutdown 
 Output overload protection overload protection rated output power point is about 105 ~ 140%; voltage overload protection is limited to power off mode; limited to short-circuit protection for the output-power shutdown mode 
 Output overvoltage protection ------ 
 ------ Overheating protection work 
 Multi-machine series and allows the implementation of the same series of multi-machine power used in tandem 
 Power time parameter preparation time (SETUP TIME) ≈ 200mS; settling time (RISE TIME) ≈ 50mS; duration (HOLD UP TIME) ≈ 20mS 
 Isolation voltage parameters [input - output: AC1.5KV, input - Shell: AC1.5KV, output - Shell: AC0.5KV] 50Hz power 1min: leakage current <5mA 
 Temperature drift coefficient parameters working temperature is about ± 0.05 [% / ℃]; absolute temperature coefficient of about 0.7 [℃ / W]; work output rated power, the body is the absolute temperature 25 ℃ ± 5 ℃ 
 Environmental conditions parameter storage environment: -20 ℃ ~ +85 ℃; 10% ~ 95% RH.. Working environment: -10 ℃ ~ +50 ℃; 20% ~ 90% RH.. (Depending on the different use of the environment and power) 
 Working standard continuous cooling mode, the natural cooling body heat (use of the environment and the installation location differences affect power usage.) 
 Appearance of the installation size Size: L198 × W99 × H38mm3 
 Color outside the net weight and total weight of about 200g; bottom shell is 1.5mm thick aluminum, the surface is silver-white; cover shell is 0.7mm thick iron, electric plastic surface treatment of silver-white 
 Design standards based on national standard GB-4943; GB-9254 
 Reliability test 6 hours, 100% full load burn and a full range of functional tests